Owatrol Deks-Olje D1 2.5L

Properties

• Can be applied to both horizontal or vertical surfaces.
• Saturates and protects all woods – Soft and Hard ; Oily and Dense.
• Excellent penetration – non-film forming.
• Replaces the natural oils lost from the wood – will not blacken the timber .
• Transparent – Enhances the woods natural grain.
• Deep penetrating, stabilises the timber - Protects against moisture ingress.
• Easy maintenance - no sanding or stripping.
• Used alone, gives a silken matt finish or overcoat with DEKS OLJE D2 for a high gloss finish

Where to use

• Hardwoods and Tropical Timber : Oak, Chestnut, Teak, Mahogany, Movingui, Ipe, Bangkirai
• Softwoods : Pine, Spruce, Larch etc
• Exterior : garden furniture, patios, walkways, boat decks, topsides on boats, portals etc
• Interior : flooring, paneling, stairs, doors, windows, door frames etc
• Marine : Can be applied above or below the waterline. Excellent primer for conventional single pack marine coatings.
• Horizontal - Vertical.

Application

• Apply a coat of D.1 - Allow to penetrate for 15-30 minutes.
• Apply a second application. Allow to penetrate for 15-30 minutes.
• Repeat this procedure until the wood is saturated i.e. will accept no more oil.
• Once the timber is saturated, always brush out or wipe up any excess product that has not penetrated to avoid shiny spots.
• Do not allow D1 to become touch dry or dry between coats (apply "wet on wet").
• Refer to the packaging for maintenance procedure.

Downloads

• 

  Owatrol Deks-Olje D1 Datasheet - 1MB

• 

  Owatrol Deks-Olje D1 Safety Datasheet - 180KB