Owatrol Textrol 5L

Properties

• Use on horizontal and vertical surfaces.
• Penetrates and protects from within the wood.
• Excellent penetration- Textrol should be in the wood not on the surface.
• Non-film forming – will not crack, peel or flake.
• Protects against moisture and UV damage.
• Quick and easy to apply - "wet on wet" application.
• Provides mildew resistance.
• Easy maintenance – no stripping or sanding.

Destination

• Soft or hardwoods: Cedar, Larch, Pine (pressure treated or not), Ash, Oak ...
• Can be applied to both horizontal surfaces (decks, walkways ,...) and vertical surfaces (cladding, shingles, fences...) and other exterior wood structures
• Do not use on new wood - use SEASONITE

Application

• Apply an application of TEXTROL and allow to penetrate for 15-30 minutes.
• Apply a second application and allow to penetrate for 15-30 minutes.
• Repeat this procedure until the wood is saturated i.e. will accept no more oil.
• Do not allow TEXTROL to become touch dry or dry between coats (apply "wet on wet").
• Once the timber is saturated, always brush out or wipe up any excess product that has not penetrated to avoid shiny spots.
• The appearance of TEXTROL gradually lightens over time due to exposure to the sun and UV rays. When the wood has lightened to a light grey colour, it is time for a maintenance application.
• Refer to the packaging for maintenance procedure.

Downloads

• 

  Owatrol Textrol Datasheet - 920KB

• 

  Owatrol Textrol Safety Datasheet - 150KB