Topcoats, in the majority for steel. Please see the primers page if you are painting onto bare metal.
- 2600: Heat resistant matt black enamel
- 4500: Fast drying sprayable enamel available in gloss, semi-gloss and matt finishes
- 4950: High build quick drying enamel, semi-gloss
- 4800: Hammered finish, limited range of colours available
- 5100 : Slower drying, anti-corrosive topcoat, limited colour range
If you have a query on these products or colours please contact us and our sales/technical team will answer any questions you may have.
Air Drying Enamel 4500 Line
4500 Line is a fast drying short oil alkyd enamel for application to suitably primed metals.
- Available in Gloss, Semi-Gloss and Matt finish
- Full British Standard and RAL colour range
- Conventional and airless spray application, small areas may be brushed or rolled
- Apply over suitable primer such as 4900, 4910 or 4700 line primer for non-ferrous metals
- Suitable for interior and exterior applications
View Product
High Build Air Drying AC Enamel 4950 Line
4950 Line is a single pack, fast drying anti-corrosive enamel for application direct to bare steel or over a suitable primer.
- Semi-gloss finish
- Full British Standard and RAL colour range
- Typical uses include shipping containers, skips and waste handling equipment
- Conventional and airless spray application
View Product
Air Drying Hammer Finish 4800 Line
4800 line hammer finish is a modified short oil alkyd pigmented with aluminium.
- Available in a range of house colours including silver, blue, green and black
- Conventional and airless spray application, small areas may be brushed or rolled
- Apply over suitable primer such as 4900, 4910 or 4700 line primer for non-ferrous metals
- Suitable for interior and exterior application
View Product
Air Drying Heat Resistant Enamel 2600/2450 Line
2600 Line is a fast drying matt black enamel based on a modified silicone resin for application to bare steel.
- Tested on exhaust manifolds up to 550°C
- For ferrous metal more than one coat required to provide corrosive protection
- If steelwork is in exposed position an alternative system may be required; please consult our technical department
2450 Line is a fast drying gloss silver enamel pigmented with aluminium for application to bare steel.
- Tested on exhaust manifolds up to 400°C
- For ferrous metal more than one coat required to provide corrosive protection
- If steelwork is in exposed position an alternative system may be required; please consult our technical department
View Product
Air Drying Anti-Corrosive Enamel 5100 Line "51AC"
5100 Line is an anti-corrosive enamel based on a medium oil alkyd.
- Typical uses include exterior steel, oil tanks, gates, farm buildings etc
- Minimum 16 hours drying before overcoating (subject to conditions)
- On bare steel we recommend a suitable primer
- Gloss finish
View Product