An acrylic primer & undercoat suitable for interior and exterior woodwork
Colours available: | White |
Appearance Of Dried Film: | Matt |
Application Rate: | Approximately 10m² per litre - this figure will vary depending on porosity fo substrate, etc. |
Drying Time At 20°C: |
Touch Dry: 20 minutes Film Dry: 1 hour Overcoat: 1 hour with water-based coatings / 4 hours with solvent-based coatings. (will vary with temperature, air movements, etc.) |
Note: Drying times of water-based paints will vary widely depending upon humidity, air circulation, ventilation, etc. | |
Packaging: | 500ml, 1 litre, 2.5 litre and 5 litre containers |
Shelf Life: | 2 years in unopened containers when stored under cover in good storage conditions. |
Storage: | Under cover with temperature range of 5°C to 32°C. Protect from frost. |
Surface Preparation: | Surface must be clean and free from oil, grease, etc. Previously painted surfaces should be lightly abraded with abrasive paper and wiped clean. |
Application: | Normally applied by brush or roller. May also be applied by spray - up to 10% of clean water may be added to achieve optimum application characteristics. For exterior use, 2 coats are recommended to give maximum durability. |
Treatment of Knots: | Water-based wood primers are essentially 'self-knotting'. The fully dried AC Universal is unaffected by the resinous material in the knots. (Unlike oil-based primers which allow the resins in the timber to permeate through the film.) Timber which is heavily knotted should be spot-primed with the AC Universal in the knotted areas and allowed to dry for at least 2 hours before overall priming. |
Clean-up: | Water - clean all equipment immediately, do not allow to dry. |
Health and Safety: | For more information request relevant Material Safety Datasheet. |
Reference No.:115-1
Interior/exterior primer/undercoat for woodwork, hardboard, chipboard, etc. May be rapidly overcoated with solvent-based and water-based decorative paints. AC Universal is a combined primer and undercoat.
Brand: Dacrylate
Size: 2.5L
Coverage: 10m²/L
For further product information and our recommendations, contact a sales advisor now on 01453 882237
Before sending an enquiry please read our Corona Virus Information Page and FAQ, as this may answer your question. Please be advised we are experiencing a high volume of enquiries so it may take us up to two working days to respond. Your enquiry will be in a queue and we will respond as soon as we can. Please provide as much detail as possible with what you are looking for (type of paint, products, colours) and where you are based. This will help us respond with the right information.