| Colours available: | White |
| Appearance Of Dried Film: | Matt |
| Application Rate: | Approximately 10m² per litre - this figure will vary depending on porosity fo substrate, etc. |
| Drying Time At 20°C: |
Touch Dry: 20 minutes Film Dry: 1 hour Overcoat: 1 hour with water-based coatings / 4 hours with solvent-based coatings. (will vary with temperature, air movements, etc.) |
| Note: Drying times of water-based paints will vary widely depending upon humidity, air circulation, ventilation, etc. | |
| Packaging: | 500ml, 1 litre, 2.5 litre and 5 litre containers |
| Shelf Life: | 2 years in unopened containers when stored under cover in good storage conditions. |
| Storage: | Under cover with temperature range of 5°C to 32°C. Protect from frost. |
| Surface Preparation: | Surface must be clean and free from oil, grease, etc. Previously painted surfaces should be lightly abraded with abrasive paper and wiped clean. |
| Application: | Normally applied by brush or roller. May also be applied by spray - up to 10% of clean water may be added to achieve optimum application characteristics. For exterior use, 2 coats are recommended to give maximum durability. |
| Treatment of Knots: | Water-based wood primers are essentially 'self-knotting'. The fully dried AC Universal is unaffected by the resinous material in the knots. (Unlike oil-based primers which allow the resins in the timber to permeate through the film.) Timber which is heavily knotted should be spot-primed with the AC Universal in the knotted areas and allowed to dry for at least 2 hours before overall priming. |
| Clean-up: | Water - clean all equipment immediately, do not allow to dry. |
| Health and Safety: | For more information request relevant Material Safety Datasheet. |
Brand: Dacrylate
Size: 1L
Coverage: 10m²/L
For further product information and our recommendations, contact a sales advisor now on 01453 882237
