A water based silk finish paint for interior walls & ceilings.
A top quality, durable mid-sheen vinyl emulsion with excellent coverage and opacity. Up to 16m² per litre on most surfaces
16m² per litre
Dependent on temperature and humidity.
To seal new or bare surfaces, 1 part clean water to 5 parts paint. For normal use: thinning should not normally exceed 1 part clean water to 10 parts paint.
Tough, washable finish.
Enhances low relief wallcoverings and textured plaster.
Not suitable in areas subject to heavy condensation.
To get the best results make sure surfaces to be painted are sound, clean and dry. New surfaces particularly must be fully dry.
Seal new or bare surfaces with a thinned first coat of Dulux Trade Vinyl Silk. The normal finishing process is 2 full coats of Vinyl Silk, on previously painted surfaces in good conditions. Where similar colours are used 1 coat may be sufficient.
After use, remove as much paint as possible from brushes before cleaning with clean water.
For further product information and our recommendations, contact a sales advisor now on 01453 882237
Before sending an enquiry please read our Corona Virus Information Page and FAQ, as this may answer your question. Please be advised we are experiencing a high volume of enquiries so it may take us up to two working days to respond. Your enquiry will be in a queue and we will respond as soon as we can. Please provide as much detail as possible with what you are looking for (type of paint, products, colours) and where you are based. This will help us respond with the right information.