A water based emulsion suitable for low traffic walls & ceilings.
A top quality, high opacity emulsion that gives excellent coverage and application. Up to 17m² per litre on sealed surfaces.
17m² per litre
Dependent on temperature and humidity.
For sealing new or bare surfaces, 1 part clean water to 5 parts paint. For normal use: thinning should not normally exceed 1 part clean water to 10 parts paint.
Greater pigment to give solid coverage.
Ideal for use on woodchip, blown vinyl wallcoverings etc, as well as dry plaster and a range of building boards.
To get the best results from Dulux Trade Vinyl Matt, make sure the surfaces to be painted are sound, clean and dry.
Seal new or bare surfaces with a thinned first coat of Dulux Trade Vinyl Matt. (Up to 1 part clean water to 5 parts paint). The normal finish process is 2 full coats of Dulux Trade Vinyl Matt on previously painted surfaces in good condition. Where similar colours are used 1 coat may be sufficient.
After use, remove as much paint as possible from brushes before cleaning with clean water.
For further product information and our recommendations, contact a sales advisor now on 01453 882237
Before sending an enquiry please read our Corona Virus Information Page and FAQ, as this may answer your question. Please be advised we are experiencing a high volume of enquiries so it may take us up to two working days to respond. Your enquiry will be in a queue and we will respond as soon as we can. Please provide as much detail as possible with what you are looking for (type of paint, products, colours) and where you are based. This will help us respond with the right information.