This is a solvent based satin finish. It is tough, hardwearing and dirt resistant and does not require an undercoat (except where a strong colour change is required.) Up to 17m² per litre on sealed surfaces
To get the best results make sure surfaces to be painted are sound, clean and dry.
The normal finishing process is 2 full coats of Dulux Trade Satinwood. However, where a strong colour change is required, then a coat of an appropriate coloured Dulux Trade Undercoat may be necessary.
After use, remove as much paint as possible from brushes before cleaning with white spirit.
Note : Whilst leading-edge technology has been used in the development of this product, the nature of solvent-based paints means that they will all discolour over time. The rate of discolouration is faster in areas with no natural or UV light. For long-lasting whiteness, we recommend the use of a water-based formulation such as Dulux Trade Diamond Satinwood.
Dulux Trade Satinwood Datasheet - 4.3MB
Brand: Dulux Trade
Size: 2.5L
Type: Top Coat
Coverage: 17m² /L
Overcoat Time: 16-24 hours
This is a bespoke product and therefore is non-returnable
For further product information and our recommendations, contact a sales advisor now on 01453 882237
