A tough, durable and attractive mid sheen finish. By using Diamond Technology it is 10 times more stain resistant than standard water-based satinwood finishes and 10 times tougher than vinyl silks. It is quick drying and of low odour compared to solvent based paints, and therefore ideal for use where minimum disruption is important. 16m² per litre on sealed surfaces
Application Information
- Coverage
- 12m² per litre
- Touch dry
- 1-2 hours depending on temperature and humidity
- Recoatable
- 6 hours
- Thinning:
- Thinning is not usually necessary but if required add up to 1 part of clean water to 10 parts of paint.
Key Benefits
- A high quality finish that is tough, durable and non-yellowing.
- Suitable for high-traffic areas.
System Information
To get the best results make sure the surfaces to be painted are sound, clean and dry. (New surfaces particularly must be fully dry.)
The normal finishing process is 2 full coats of Dulux Trade Diamond Satinwood, but on previously painted surfaces in good condition, where similar colours are used, 1 coat may be sufficient.
After use, clean tools with water.
