A solvent based stain block primer suitable for interior and exterior wood.
An aluminium pigmented primer for use on all types of wood and aged creosoted or bitumen coated surfaces. Up to 17m² per litre on most surfaces
17m² per litre
3-4 hours dependent upon temperature / humidity
After 16-24 hours. Allow 24 hours between coats for aged creosoted or bitumen coated surfaces.
This product should not be thinned.
Can be used both inside and out on resinous timber or surfaces that are liable to bleed through a newly applied paint system, e.g., aged creosote or bitumen.
An ideal primer for use on fire damaged wood after thorough washing down.
To get the best results make sure surfaces to be painted are sound, clean and dry.
After suitable surface preparation, apply 1 or 2 coats of the Aluminium Wood Primer. Apply 2 coats over highly resinous wood or when using over aged creosote or bitumen, allowing 24 hours between coats.
After use, remove as much paint as possible from brushes before cleaning with white spirit.
For further product information and our recommendations, contact a sales advisor now on 01453 882237
Before sending an enquiry please read our Corona Virus Information Page and FAQ, as this may answer your question. Please be advised we are experiencing a high volume of enquiries so it may take us up to two working days to respond. Your enquiry will be in a queue and we will respond as soon as we can. Please provide as much detail as possible with what you are looking for (type of paint, products, colours) and where you are based. This will help us respond with the right information.