A water based 2-in -1 problem solving primer, that seals and binds surfaces as well as blocks common stains. Up to 14m² per litre

Application Information  

14m² per litre
Touch dry
Dependent upon temperature and humidity
6-8 hours. Note - this product can usually be recoated within 6-8 hours but on very porous surfaces a longer drying time may be required.
This product does not require thinning.

Key Benefits  

  • Seals powdery, dry and friable surfaces, including limewash and distemper
  • Blocks stains caused by water, ink, smoke damage, grease etc.
  • For plaster surfaces.

System Information 

To get the best results make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry).

After suitable preparation apply 1 coat of Stain Block Plus to all bare or stained surfaces and allow to dry. Two coats will be necessary for difficult stains.

After use, remove as much paint as possible from brushes before cleaning with clean water


Brand: Dulux Trade

Size: 1L

Type: Problem Solving Primer

Coverage: 14m² /L

Overcoat Time: 6-8 hours

Dulux Trade Stainblock + 1L header image

£38.17Ex. VAT: £31.81

« Go Back

For further product information and our recommendations, contact a sales advisor now on 01453 882237

Not the right size for you? [Static]

Why not consider one of these as an alternative:

    • Dulux Trade Stainblock + 2.5LBrand: Dulux Trade Units: 2.5L Layer: Problem Solving Primer
    • Dulux Trade Stainblock + 5LBrand: Dulux Trade Units: 5L Layer: Problem Solving Primer