Dulux Trade Metalshield Gloss White 2.5L

Specially formulated for metal, with a quick-drying solvent-based formulation that can be overcoated within 4-6 hours (depending upon conditions). 13m² per litre

Application Information  

Coverage

13m² per litre

Touch dry

1-2 hours dependent upon temperature / humidity

Recoatable

4-6 hours

Thinning:

Not usually required.

Key Benefits  

• Provides lasting protection against corrosion on metal substrates such as railings, garage doors, lift shafts, staircases and emergency exit routes.
• Applying our straightforward, single-pack system: Metalshield Zinc Phosphate Primer from Dulux Trade + 2 coats of Metalshield Gloss Finish from Dulux Trade will deliver up to 8 years metal protection.
• Suitable for ferrous and non ferrous metals
• Straightforward primer/ finish system delivers up to 8 years protection.
• Delivers best value by extending maintenance cycles
• Quick drying times

System Information 

For best results, surfaces must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc.

Apply 1 coat of the appropriate Metalshield primer from Dulux Trade followed by 2 coats of Metalshield Gloss Finish from Dulux Trade. Where a special process colour is to be used, or where a strong colour change is required, additional coats will be required.

After use, remove as much paint as possible from brushes before cleaning with white spirit.

Downloads

• 

  Dulux Trade Metalshield Gloss Datasheet - 4.3MB

• 

  Dulux Trade Metalshield Gloss Safety Datasheet - 140KB