Armstead Trade Pliolite Based Masonry is a professional quality, durable, solvent-based smooth masonry paint. Based on Pliolite Acrylated Rubber resin, it provides a long lasting coating with good adhesion and resistance to moisture and alkali attack. It is easy to apply and provides good coverage. Armstead Trade Pliolite Based Masonry is much more tolerant to showery or cold weather during application than traditional water-based exterior masonry paints, and can be applied to masonry surfaces at virtually any time. It is also BBA certified to provide up to 15 year protection.

Application Information  

Coverage
Up to 8m²/L
Touch dry
1-1.5 hours @ 20°C/65%RH*
*Dependent upon temperature/humidity
Recoatable
12 hours @ 20°C/65%RH*
*Dependent upon temperature/humidity
Thinning:
Thinning is not recommended.

Key Benefits  

  • Up to 15 years protection.
  • Resistant to moisture and akali attack. 
  • Can be applied down to -5 C.

System Information  

Stir thouroughly before use. The normal finishing process is 1 or 2 coats of Armstead Trade Pliolite Based Masonry. Touch dry 1-1.5 hours at 20ºC/65%RH. Drying time will vary according to temperature and humidity e.g. the drying times quoted will be significantly longer in cold, damp conditions. Coverage up to 8m²/l depending on surface texture. These figures are only an approximate guide and may be reduced. If in doubt, apply a small trial area first.

After use, remove as much paint as possible from equipment before cleaning with brush cleaner. Do not use or store in extremes of temperature. When this paint container is empty please ask your stockist about recycling. If you have leftover paint, please dispose of it responsibly and consider donating it to Community RePaint.

Brand: Armstead

Size: 5L

Type: Top Coat

Coverage: 6-8m2 /L

Overcoat Time: 12 hours

Armstead Pliolite Masonry Magnolia 5L header image

£52.86Ex. VAT: £44.05

« Go Back

For further product information and our recommendations, contact a sales advisor now on 01453 882237