Reference No.: 104-Line and 100-Line

An acrylic emulsion high quality water-based paint for interior and exterior use on masonry, cement, plaster, concrete, asbestos, hardboard, timber, etc. Ideal for anaglypta and woodchip papers. The satin finish gives a durable velvet sheen. Coatings are hardwearing and scrub-resistant.

Colours available : BS 4800 and RAL colours are available on Dacmix tinting scheme.
Appearance of Dried Film : Satin finish or matt finish.
Application Rate : 10-15m² per litre depending on porosity and texture of surface.
Drying Time At 20°C : Touch Dry : 1 hour
Film Dry : 2-4 hours
Overcoat : 2-4 hours
(will vary with temperature, air movements, etc.) 
Note : Drying times emulsion paints will vary widely depending upon humidity, air circulation, ventilation, etc.
Packaging : 1 litre, 2.5 litre and 5 litre containers
Shelf Life : 2 years or longer in unopened containers, when stored under cover in good storage conditions.
Storage : Under cover with temperature range of 5°C to 32°C. Protect from frost.
Surface Preparation : All surfaces must be clean, dry, and free from oil, grease, etc. Remove all loose, friable material, eg., loose plaster, old flaking paint, etc.
On new and/or porous surfaces, thin first coat with up to 30% of clean water. Underbound substrates should be sealed with Dacrylate Masonry Sealer Ref.: 150-50.
Application : Do not apply at temperatures below 5°C.
Up to 15% of clean water may be added to achieve optimum spray characteristics.
Clean-up : Water - clean equipment immediately, do not allow emulsion to dry.
Health and Safety : For more information request relevant Material Safety Datasheet.


Brand: Dacrylate

Size: 2.5L

Coverage: 10-15m²/L

Overcoat Time: 2-4 hours

Dacrylate Acrylic Satin Emulsion Black 2.5L header image

£33.95Ex. VAT: £28.29

« Go Back

For further product information and our recommendations, contact a sales advisor now on 01453 882237