Sigma Protective Coatings Sigmacover 350 White/Light Grey 4L

Sigmacover 350 is a two component, high-build polyamide cured anticorrosive epoxy primer/coating.

• Surface tolerant primer/coating for wide use in Marine and Protective Coatings
• Marine use: suitable on topsides, decks, superstructures and cargo holds
• Excellent corrosion resistance
• Compatible with various aged coatings
• Suitable as floor coating for light traffic with dry to walk on time of 6 hours at 20°C
• Good impact and abrasion resistance
• Smooth film, easy to clean
• Resistant to splash and spillage of a wide range of chemicals

Colours available: White and Light Grey

Gloss level: Semi gloss

Touch dry: 2 hours

Recoat: minimum 6 hours, maximum 21 days

Full cure: 7 days (at 20°c)

Thinner: 91-92

Please see datasheet for additional information, including preparation and application.

Downloads

• 

  Sigmacover 350 TDS - 270KB