Properties

  • Can be applied to both horizontal or vertical surfaces.
  • Saturates and protects all woods – Soft and Hard ; Oily and Dense.
  • Excellent penetration – non-film forming.
  • Replaces the natural oils lost from the wood – will not blacken the timber .
  • Transparent – Enhances the woods natural grain.
  • Deep penetrating, stabilises the timber - Protects against moisture ingress.
  • Easy maintenance - no sanding or stripping.
  • Used alone, gives a silken matt finish or overcoat with DEKS OLJE D2 for a high gloss finish

Where to use

  • Hardwoods and Tropical Timber : Oak, Chestnut, Teak, Mahogany, Movingui, Ipe, Bangkirai
  • Softwoods : Pine, Spruce, Larch etc
  • Exterior : garden furniture, patios, walkways, boat decks, topsides on boats, portals etc
  • Interior : flooring, paneling, stairs, doors, windows, door frames etc
  • Marine : Can be applied above or below the waterline. Excellent primer for conventional single pack marine coatings.
  • Horizontal - Vertical.

Application

  • Apply a coat of D.1 - Allow to penetrate for 15-30 minutes.
  • Apply a second application. Allow to penetrate for 15-30 minutes.
  • Repeat this procedure until the wood is saturated i.e. will accept no more oil.
  • Once the timber is saturated, always brush out or wipe up any excess product that has not penetrated to avoid shiny spots.
  • Do not allow D1 to become touch dry or dry between coats (apply "wet on wet").
  • Refer to the packaging for maintenance procedure.

Downloads

Brand: Owatrol

Size: 2.5L

Type: Base Coat

Coverage: 1-12*m² /L

Overcoat Time: 15-30 minutes

In Stock: 2

Owatrol Deks-Olje D1 2.5L header image

£73.90Ex. VAT: £61.58

« Go Back